audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Installing engine > < Separating engine and dual-clutch gearbox

A3 Mk2

Securing engine to assembly stand
   
Securing engine to assembly stand
Special tools and workshop equipment required
t  Lifting tackle -2024 A-
t  Workshop hoist -VAS 6100-
t  Engine and gearbox support -VAS 6095-

Procedure
l  Gearbox detached from engine → Chapter „Separating engine from manual gearbox“ or → Chapter „Separating engine and dual-clutch gearbox“.
–  Remove engine cover panel -arrows-.
   
–  Engage lifting tackle -2024 A- on engine and workshop hoist -VAS 6100-.
  Note
To adjust to the centre of gravity of the assembly, the perforated rails of the support hooks must be positioned as shown.
  WARNING
Accident risk from loose components of lifting tackle.
The support hooks and retaining pins on the lifting tackle must be secured with locking pins -arrows-.
–  Lift engine off engine and gearbox jack -V.A.G 1383 A- using workshop hoist -VAS 6100-.
  A10-10577
–  Secure engine to engine and gearbox support -VAS 6095- (gearbox end) as shown in illustration.
  N10-10032

Installing engine > < Separating engine and dual-clutch gearbox