audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Installing engine > < Separating engine and gearbox

A3 Mk2

Securing engine to assembly stand
   
Securing engine to assembly stand
Special tools and workshop equipment required
t  Lifting tackle -2024 A-
t  Workshop hoist -VAS 6100-
t  Engine and gearbox support -VAS 6095-

l  Gearbox detached from engine.
–  Detach crankcase breather hose from oil filler neck.
   
–  Engage lifting tackle -2024 A- on engine and workshop hoist -VAS 6100-.
  Note
To adjust to the centre of gravity of the assembly, the perforated rails of the support hooks must be positioned as shown.
  WARNING
The support hooks and locating pins on the lifting tackle must be secured with locking pins (arrows in illustration).
–  Lift engine off engine bracket -VAS 6100- using workshop hoist -T10012-.
Secure engine to engine and gearbox support -VAS 6095- when dismantling/assembling engine.
  A10-1640

Installing engine > < Separating engine and gearbox