audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Securing engine to assembly stand > < Removing engine

A3 Mk2

Separating engine and gearbox
Separating engine and gearbox
l  Engine/gearbox assembly removed and attached to engine bracket -T10012-.
   
–  Unscrew bolt -1- with gearbox installed.
–  Pull up cover plate -2- and remove.
  Note
Shown in illustration with gearbox removed.
  A34-0234
–  Remove bolts -1 ... 8- on engine/gearbox flange.
–  Detach starter.
  Note
The manual gearbox can be detached from the engine without a workshop hoist, a 2nd mechanic is required for this purpose.
–  Separate gearbox from engine.
  A37-0214

Securing engine to assembly stand > < Removing engine