Audi Workshop Service and Repair Manuals > A3 Mk2 > Power unit | 4-cylinder direct petrol injection engine (2.0 ltr. 4-valve turbo), mechanics | Engine cooling | Parts of cooling system (on body)

Removing and installing radiator cowl

Special tools and workshop equipment required

t	Hose clip pliers -V.A.G 1921-

Removing

–	Unscrew bolts -1- from above.

–	Remove noise insulation → Rep. gr.50.

–	Remove air pipe -1 and 2- for charge air cooler.

–	Unplug electrical connector -2-.

–	Unscrew the bolts -3- and remove radiator cowl from below.

Installing

Installation is carried out in the reverse order; note the following:

l	Tightening torques → Chapter

–	Install air pipes with plug-in connectors → Chapter.

Audi Workshop Service and Repair Manuals