A3 Mk2
| Turbocharger - exploded view |
| 1 - | Banjo bolt |
| q | Renew |
| q | 60 Nm |
| 2 - | O-rings |
| q | Renew |
| 3 - | Bolt |
| q | 15 Nm |
| 4 - | Oil return line |
| 5 - | Nuts |
| q | 20 Nm |
| 6 - | Heat shield |
| 7 - | Gasket |
| q | Renew |
| 8 - | Gasket |
| q | Renew |
| 9 - | Pulsation damper |
| 10 - | Bolt |
| q | 10 Nm |
| 11 - | Bolt |
| q | 8 Nm |
| 12 - | Bracket |
| q | For electrical wiring |
| 13 - | Heat shield |
| 14 - | Turbocharger |
| q | Removing and installing turbocharger → Chapter |
| q | Renewing vacuum unit with position sender for charge pressure positioner -G581- → Chapter |
| 15 - | Bolt |
| q | 9 Nm |
| 16 - | Oil supply line |
| q | Check for obstructions |
| q | Before installing, fill turbocharger with engine oil at connection for oil supply line |
| q | Tightening union nuts → Item |
| 17 - | Gasket |
| q | Renew |
| 18 - | Nut |
| q | 20 Nm |
| 19 - | Gasket |
| q | Renew |
| 20 - | Nut |
| q | Renew |
| q | 20 Nm |
| 21 - | Pipe |
| q | To exhaust gas recirculation cooler |
| 22 - | Exhaust gas temperature sender 1 -G235- |
| q | Removing and installing → Chapter |
| 23 - | Bolt |
| q | 20 Nm |
| 24 - | Support |
| q | For turbocharger |
| 25 - | O-rings |
| q | Renew |