| Renewing steering box (changing from generation 1 to generation 2) |
Note | t
| The generation 1 steering box is no longer available as a replacement part. |
| t
| A generation 2 steering box must therefore be fitted instead. |
| t
| On some vehicles, other components must also be renewed in addition to the steering box. The vehicles affected and the procedure required are described below and in → Electronic parts catalogue. |
| When replacing a generation 1 steering box with a generation 2 steering box, the parts listed below must also be renewed. |
| t
| Renew subframe (applies to Part Nos. from 1K0.199.369 up to and including 1K0.199.369.E). Subframe does not have to be renewed (applies to Part Nos. from 1K0.199.369.F onwards). The appropriate index must be specified for component 1K0.199.313 when ordering a replacement part from the → Electronic parts catalogue. |
| t
| On left-hand drive vehicles, renew suspension bracket (right-side) from Part No. 1K0.199.296 up to and including 1K0.199.296.C). Suspension bracket does not have to be renewed for Part Nos. from 1K0.199.296.D onwards). For correct version refer to → Electronic parts catalogue. |
| t
| On right-hand drive vehicles, renew suspension bracket (left-side) from Part No. 1K0.199.295 up to and including 1K0.199.295.C). Suspension bracket does not have to be renewed for Part Nos. from 1K0.199.295.D onwards). For correct version refer to → Electronic parts catalogue. |
|
|
|
