A3 Quattro L4-2.0L Turbo (CBFA) (2009)
-
Tension the engine with the spindle.
-
Remove subframe bolts - arrows - on the engine.
-
Lower the engine approx. 55 mm.
CAUTION!
Risk of destroying due to reversed running direction on a used ribbed belt.
‹› Before removing ribbed belt, marking running direction with chalk or felt-tip pen for reinstallation later.
-
To release ribbed belt tension, rotate tensioner in direction of - arrow -.
-
Secure tensioner with Locking Pin (T10060A).
-
Remove the ribbed belt from the tensioner.
-
Free up the wiring harness - arrow -.