A3 Quattro V6-3.2L (BUB) (2008)
/Page-724001.png)
Drive Belt Tensioner: Service and Repair
Ribbed Belt Tensioner
Removing
‹› Before removing the ribbed belt, mark the turning direction on it with chalk or a felt tip pen. A reversed direction of rotation can cause damage to
the belt under operating conditions.
-
Swing tensioning device in direction of - arrow - to relieve tension on the ribbed belt and then lock it in place using the (T10060 A).
‹› The tensioner is not locked.
-
Remove bolt - arrow - and remove ribbed belt tensioner.
Installing
‹› Tightening specifications, refer to => [ Ribbed Belt Drive Component Overview ] See: Drive Belt/Service and Repair/Ribbed Belt Drive
Component Overview
Installation is in reverse order of removal, note the following:
-
Install ribbed belt. Refer to => [ Ribbed Belt ] See: Drive Belt/Service and Repair/Ribbed Belt.
