A3 Quattro V6-3.2L (BUB) (2008)
Engine Accessory Bracket: Service and Repair
Accessory Bracket
Special tools, testers and auxiliary items required
^
Locking Pin T10060.
Removing
Note: All cable ties which are opened or cut open when removing, must be replaced in the same position when installing.
CAUTION: Observe safety precautions when disconnecting the battery.
-
Remove tool formed insert under luggage compartment floor covering.
-
Remove cover -arrow- for battery compartment
-
Remove formed insert from over the battery.
-
With ignition switched off, disconnect Battery Ground (GND) cable -arrow-.
-
Remove center noise insulation fasteners -1 to 3-.