A3 Quattro V6-3.2L (BUB) (2008)
/Page-725002.png)
-
Remove right noise insulation fasteners -1 to 3-.
-
Disconnect secondary air hose at position indicated by -arrow-.
-
Free up air hose to Secondary Air Injection (AIR) pump.
-
Remove top mounting bolts for fan shroud - top arrows -.
Note: Before removing ribbed belt, mark the turning direction on it with chalk or a felt tip pen. A reversed direction of rotation can cause damage to
the belt under operating conditions.
-
Swing tensioning device in direction of -arrow- to relieve tension on the ribbed belt and then lock it in place using Locking Pin T10060.
-
Remove ribbed belt.
