A3 Quattro V6-3.2L (BUB) (2008)
-
Where necessary, pull the wiring router - 1 - off from the accelerator pedal module.
Audi A3 Cabriolet:
-
Disconnect electrical connector - 2 - on the accelerator pedal module by pulling the release - 1 - up as far as the stop - arrow -.
All Vehicles
-
Pry off cover using a screwdriver.
-
Remove bolt.
-
Push release tool (T10238) into the intended openings - arrow - up to the stop, as shown, and remove the accelerator pedal module.