A3 Quattro V6-3.2L (BUB) (2008)
/Page-1019003.png)
Installing
‹› Tightening specifications => [ Accelerator Pedal Mechanism Assembly Overview ] See: Accelerator Pedal Mechanism Assembly Overview.
Installation is in reverse order of removal, note the following:
-
Connect wiring router - 1 - and electrical connector - 2 - to the accelerator pedal module - 5 -.
‹› The connector must engage audibly.
-
Push accelerator pedal module onto the securing studs - 6 -.
-
Insert centering pin - 7 - into hole on vehicle floor.
-
Secure accelerator pedal module with the bolt - 3 - and install the cap - 4 -.
