A3 Quattro V6-3.2L (BUB) (2008)
Valve Body: Service and Repair
DSG Mechatronic - 6 Spd. Direct Shift A/T 02E All Wheel Drive
Removing
CAUTION
Do not run engine with the oil pan removed or without transmission oil filling and do not tow vehicle.
Note:
^
Rules for cleanliness when working on transmission.
^
General repair notes.
^
Coat O-rings and seals with transmission fluid. Other lubricating substances lead to functional problems in the hydraulic transmission control.
-
Drain transmission fluid.
-
Remove oil pan.
-
Remove left noise insulation -arrows-.
-
Remove bolts -arrows- and remove the transmission fluid pump cover -A-.
CAUTION
If the transmission fluid pump cover is not removed, the long "sensor arm" will be damaged when removing the Mechatronic.
-
Touch vehicle ground with hand (without gloves) to discharge static.
CAUTION
^
Always discharge static electricity by touching a grounded object, e.g. vehicle ground, before touching or removing Direct Shift Gearbox
(DSG) Mechatronic J743.
^
Connector terminals of transmission connector must not be touched by hand under any circumstances because control module and
therefore Mechatronic may be destroyed by static discharge.