A3 Quattro V6-3.2L (BUB) (2008)
-
Carefully release connector of the Transmission Input Speed (RPM) Sensor G182 with Clutch Oil Temperature Sensor G509 using a small
screwdriver -1- and at the same time carefully pry out the connector using a second screwdriver -2-.
Note:
^
Do not pull on wire of connector -A- ! If the wiring is damaged, the G182 / G509 must be replaced.
-
Loosen wire to the G182 / G509 from the retaining tabs -arrows- at the Mechatronic.
-
Remove bolts in sequence -1 to 10-.
-
Carefully pull Mechatronic out of the transmission housing until the long "sensor arm" -B - is no longer located within the transmission housing.
-
Carefully pivot the Mechatronic downward and out.
Note: