A3 Quattro V6-3.2L (CBRA) (2009)
‹› Cross-section thickness of adhesive bead is determined by dimension of opening in nozzle tip and rate of application.
-
Apply adhesive sealing material along perimeter according to illustration.
-
Distance between the center of the adhesive bead and the end of the window glass: 8 mm.
-
Using two suction lifters, install windshield in windshield opening.
CAUTION!
Window must be installed within 15 minutes, otherwise bonding properties of adhesive will be impaired.
-
Center window along sides.
-
Spacing between edge of windshield and roof frame must be 4 mm.
-
Press drip rail into clips - 3 - until it stops only after curing time has elapsed for adhesive - 1 -.
-
When pressing in drip rail, make sure sealing lip lies flat against windshield and does not slip behind edge of windshield.
-
Hollow rivet - 2 -
-
Secure window in window opening with adhesive tape.