A4 Cabriolet L4-2.0L Turbo (BWT) (2007)
![background image](/audi/a4_cabriolet/l4-2.0l_turbo_(bwt)/Page-1691005.png)
-
Insert alternately and with same alignment each lining disc - 2 - (6 pieces) and outer disc - 3 - (5 pieces, 1.9 mm thickness).
Lining disc alignment:
CAUTION!
‹› The lining discs must be installed with the same alignment, that is the places without outside teeth - arrows - must always lie one on top
of the other. Only in this way is the adjustment correct; you must mark the cylinder for correct installation, if necessary.
-
Insert determined upper adjustment disc - 4 - in input shaft cylinder - A -.