A4 Cabriolet Mk2
| Removing and installing rear lid lock and handle mechanism |
| 1 - | Rear lid lock |
| q | To remove, unclip operating rod from joint bush and disengage. |
| q | Unscrew the nuts → Item and detach the rear lid lock. |
| 2 - | Joint bush |
| q | After installing rear lid lock, engage and secure operating rod. |
| 3 - | Nut |
| q | 8 Nm |
| 4 - | Operating rod |
| 5 - | Bowden cable |
| 6 - | Lock cylinder |
| q | Removing: |
| – | Unplug connectors. |
| – | Disengage Bowden cable → Item from lock cylinder. |
| – | Unscrew the bolt → Item. |
| – | Turn lock cylinder through 90°. |
| – | Take lock cylinder out of handle mechanism. |
| 7 - | Bolt |
| q | 8 Nm |
| 8 - | Motor |
| q | Country-specific |
| 9 - | Handle cover strip |
| q | Removing: |
| – | Remove rear lid trim. |
| – | Remove lock cylinder. |
| – | Unscrew the nuts → Item. |
| – | Press in fasteners -arrows-. |
| – | Take out handle cover strip. |
| 10 - | Nut |
| q | 8 Nm |
