Caution | Hydraulic fluid damages paintwork. It is therefore to be removed immediately from painted surfaces if spilt. |
|
| t
| Carefully clean all joints and adjacent areas before disconnecting. |
| t
| Place parts removed on a clean surface and cover them over. Make use of sheeting and paper. Do not use fluffy cloths. |
| t
| Carefully cover or seal opened components if repairs are not to be performed immediately. |
| t
| Only install clean components: Do not remove replacement parts from their wrapping until immediately prior to installation. |
| t
| Place drip tray beneath connections to be opened or use sheeting and cloths to stop hydraulic fluid coming into contact with painted surfaces. |
| t
| Seal open hydraulic pipes with caps to stop hydraulic fluid escaping. |
|
|
|
