A4 Cabriolet Mk2
Note
|
1 - | Cable tie |
2 - | Connector |
3 - | Fuse |
4 - | Head restraint microswitch |
t | Adjusting and checking operation |
– | Remove backrest cover panel → Chapter. |
– | Use screwdriver to prise out fuse -3-. |
– | Move microswitch -4- so that head restraint is moved downwards and deactivated with release lever 1/3 raised. |
– | Check operation of head restraint at adjustment switch. |
– | Head restraint is not actuated when backrest release lever is raised by a third. |
– | Head restraint is actuated when release lever is in rest position. |
– | If necessary, correct position of microswitch -4- and check its operation again. |
5 - | Retaining tabs (2x) |