A4 Cabriolet Mk2
| Removing and installing four-way lumber support - vehicles up to model year 2005 |
| 1 - | Bowden cable for lumbar support height adjustment |
| 2 - | Bowden cable for lumbar support adjustment |
| 3 - | Four-way lumbar support |
| t | Removing |
| – | Remove seat → Chapter. |
| – | Attach seat repair stand -VAS 6136- to engine and gearbox support -VAS 6095-. |
| – | Attach front seat to seat repair stand -VAS 6136-. |
| – | Remove side trim (sill side) → Chapter. |
| – | Remove side trim (tunnel side) → Chapter. |
| – | Remove backrest → Chapter. |
| – | Remove backrest cover panel → Chapter. |
| – | Remove backrest frame → Chapter. |
| – | Disengage Bowden cable for lumbar support adjustment -2- at hook -4-. |
| – | Disengage Bowden cable for lumbar support height adjustment -1- at retaining pin -5- and at guide roller -6-. |
| – | Disengage bottom of four-way lumbar support -3- at locations marked -B- (2x). |
| – | Disengage top of four-way lumbar support -3- at locations marked -A- (2x). |
| t | Installing |
| – | Install in reverse order of removal. |
| 4 - | Hook |
| 5 - | Retaining pin |
| 6 - | Guide roller |