| Renewing electric height adjuster on seats with upper section laser-welded to seat rail (new version) |
Note | t
| The new pivot stud, nut and plastic toothed segment are supplied together with the height adjuster replacement part. |
| t
| The new micro-encapsulated bolts for securing the triangular holder to the height adjustment mechanism are supplied with the height adjuster replacement part. |
| –
| Move seat forwards as far as possible. |
| –
| Loosen pivot stud, nut and drive lever for height adjuster mechanism. |
| –
| Unscrew the two micro-encapsulated bolts between triangular holder and height adjuster mechanism. |
| –
| Remove height adjuster mechanism. |
| –
| The white plastic toothed segment must be renewed if it is damaged. |
| –
| Clean the threads on the height adjuster mechanism. |
| –
| Install height adjuster mechanism in reverse order of removal. |
Note | Threaded holes for bolts must always be cleaned (e.g. with a thread tap). |
|
|
|
