A4 Cabriolet Mk2
Hydraulic unit and brake lines |
1 - | Brake master cylinder and brake servo |
2 - | Brake line |
q | Brake master cylinder/primary piston circuit to hydraulic unit |
q | Tightening torque: 20 Nm |
3 - | Brake line |
q | Brake master cylinder/secondary piston circuit to hydraulic unit |
q | Tightening torque: 20 Nm |
4 - | Brake line |
q | Hydraulic unit to front left brake caliper |
q | Tightening torque: 12 Nm |
5 - | Brake line |
q | Hydraulic unit to front right brake caliper |
q | Tightening torque: 12 Nm |
6 - | Brake line |
q | Hydraulic unit to rear right brake caliper |
q | Tightening torque: 12 Nm |
7 - | Brake line |
q | Hydraulic unit to rear left brake caliper |
q | Tightening torque: 12 Nm |
8 - | Brake pressure sender -G201- |
q | Screws onto hydraulic unit |
q | Tightening torque: 20 Nm |
q | Removing and installing → Chapter |
9 - | ABS hydraulic unit -N55- with control unit -J104- |
q | Removing and installing → Chapter |
10 - | Retaining clip |
11 - | Buffers (4x) |
12 - | Vacuum pump |
q | Removing and installing → Chapter |
13 - | Buffer (1x) |
14 - | Hexagon bolt (3x), 10 Nm |
15 - | Bracket |