audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Adaption of auxiliary heater > < Display group "126”

A4 Cabriolet Mk2

Display groups currently not used for service purposes
Display groups currently not used for service purposes
  Note
Depending on the version of the auxiliary heater control unit -J364-, there may not be any display in these measured value blocks or the display zone may have a black background.
   
Display group numberDisplay zoneDesignation
0801Manufacturer and factory code for auxiliary heater control unit -J364->
 2Date of manufacture of auxiliary heater control unit -J364-
 3Manufacturer's modification status of auxiliary heater control unit -J364-
 4Number of test bench on which auxiliary heater control unit -J364- was checked
 5Manufacturer's serial number of auxiliary heater control unit -J364-

   
Display group numberDisplay zoneDesignation
0821Flash tool number of data level in auxiliary heater control unit -J364-
 2Date on which last flash was performed for auxiliary heater control unit -J364- (flash = input of new data)
 3Hardware (electronics) level of auxiliary heater control unit -J364-
 4Software level (electronics data level) of auxiliary heater control unit -J364-
0901
and
2		Status of test performed on auxiliary heater manufacture for auxiliary heater control unit -J364-
t  Display = ARDIC TEST: Y
–  If “ARDIC TEST: N” is displayed, the auxiliary heater control unit -J364- does not activate the auxiliary heater (not all scheduled tests were performed on manufacture of auxiliary heater control unit -J364-).
 3
and
4		Status of test performed at factory for auxiliary heater control unit -J364-
t  Display = BERIFORS TEST: Y
–  If “BERIFORS TEST: N” is displayed, the auxiliary heater control unit -J364- does not activate the auxiliary heater (not all scheduled tests were performed on manufacture of auxiliary heater control unit -J364-).

   

Adaption of auxiliary heater > < Display group "126”