A4 Cabriolet Mk2
Oil filter bracket with oil cooler - exploded view |
1 - | Screw plug, 25 Nm |
2 - | Seal |
q | Renew |
3 - | Oil cooler |
q | See note → Anchor |
q | Diagram of coolant hose connections → Chapter |
4 - | Seal |
q | Renew |
q | Installation position → Fig. |
5 - | 14 Nm + 90° (1/4 turn) further |
q | Renew |
q | Tighten in diagonal sequence |
6 - | Gasket |
q | Renew |
7 - | Oil filter bracket |
q | With oil retention valve |
q | The oil retention valve cannot be renewed separately |
8 - | Seal |
q | Renew |
9 - | Oil pressure switch -F1- |
q | 0.7 bar - brown |
q | Checking → Chapter |
q | Tighten to 20 Nm |
10 - | Sealing cap, 25 Nm |
11 - | O-ring |
q | Renew |
12 - | Oil filter element |
q | Removing and installing → Booklet803 or → Booklet805 |
13 - | O-ring |
q | Renew |
14 - | Oil supply pipe |
q | Tighten to 22 Nm |
q | To turbocharger |
q | Note installation sequence: |
– | First attach both ends of pipe loosely. |
– | Then tighten connections to final torque. |
– | Tighten clip for oil supply pipe last. |
15 - | Connection |
16 - | Seal |
q | Renew |
|