A4 Cabriolet Mk2
| Charge air cooling - exploded view |
| 1 - | Air pipe |
| q | To lock carrier and turbocharger |
| q | Must be free of oil and grease when installing |
| 2 - | Air hose |
| q | To turbocharger |
| q | Only on vehicles with engine code letters BRD and BVA |
| q | Must be free of oil and grease when installing |
| 3 - | Air duct |
| q | For charge air cooler (right-side) |
| q | Only on vehicles with engine code letters BRD and BVA |
| 4 - | Charge air cooler (right-side) |
| q | Only on vehicles with engine code letters BRD and BVA |
| q | Removing and installing → Chapter |
| 5 - | Rubber grommet |
| 6 - | Retainer |
| 7 - | Bracket for charge air cooler (right-side) |
| q | Only on vehicles with engine code letters BRD and BVA |
| 8 - | Seal |
| q | Renew if damaged or leaking |
| 9 - | Air hose |
| q | To intake manifold |
| q | Must be free of oil and grease when installing |
| 10 - | O-ring |
| q | Renew |
| 11 - | Charge pressure sender -G31-/intake air temperature sender -G42- |
| q | Removing and installing → Chapter |
| 12 - | 5 Nm |
| 13 - | Retainer |
| 14 - | Bracket for charge air cooler (left-side) |
| 15 - | Rubber grommet |
| 16 - | 22 Nm |
| 17 - | Charge air cooler (left-side) |
| q | Removing and installing → Chapter |
| 18 - | Air duct |
| q | For charge air cooler (left-side) |
