A4 Cabriolet Mk2
Poly V-belt drive for air conditioner compressor - exploded view of components |
1 - | Poly V-belt |
q | Before removing, mark direction of rotation with chalk or felt-tipped pen. If the belt runs in the opposite direction when it is refitted, this can cause breakage |
q | Removing and installing → Chapter |
q | Check for wear |
q | When installing, make sure it is properly seated on pulleys. |
2 - | Cover for tensioning roller |
3 - | 22 Nm |
4 - | Tensioning roller for poly V-belt |
q | Removing and installing → Chapter „Removing and installing poly V-belt for A/C compressor“ |
5 - | Bracket for air conditioner compressor |
6 - | Dowel sleeve |
q | 2x |
q | Check for correct seating in bracket |
7 - | 22 Nm |
8 - | 22 Nm |
9 - | Refrigerant lines |
WARNING
|
10 - | 22 Nm |
11 - | Air conditioner compressor |
WARNING
|
q | After detaching, secure compressor to subframe using wire or similar. Do not leave it suspended from refrigerant pipes. |