A4 Cabriolet Mk2
| Oil pump, sump (bottom section) - exploded view of components |
| 1 - | 10 Nm |
| 2 - | Sump (bottom section) |
| q | Removing and installing → Chapter |
| q | With oil level and oil temperature sender -G266- |
| q | Removing and installing oil level and oil temperature sender -G266- → Fig. |
| 3 - | 10 Nm |
| 4 - | Intake connecting pipe |
| q | With oil strainer |
| 5 - | Seal |
| q | Renew |
| 6 - | O-ring |
| q | Renew |
| 7 - | 10 Nm |
| 8 - | Oil pipe |
| 9 - | Seal |
| q | Renew |
| 10 - | 10 Nm |
| 11 - | Oil pipe |
| 12 - | O-rings |
| q | Renew |
| 13 - | Drive shaft for coolant pump |
| 14 - | Dowel sleeves |
| q | 2x |
| 15 - | Seal |
| q | Renew |
| 16 - | Oil pump |
| q | Do not dismantle |
| q | With pressure control valve: approx. 4 bar |
| q | Removing and installing → Chapter |
| 17 - | Oil pump drive shaft |
| 18 - | 10 Nm |
| 19 - | Housing for intake connecting pipe |
| 20 - | O-ring |
| q | Renew |
| 21 - | Seal |
| q | Renew |
| 22 - | 10 Nm |
| 23 - | Seal |
| q | Renew |
| 24 - | Oil drain plug, 50 Nm |
|
|
