audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Adapting kick-down function after renewing accelerator pedal position sender or engine control unit > < Accelerator pedal module - exploded view of components

A4 Cabriolet Mk2

Removing and installing accelerator pedal module with accelerator position sender
Removing and installing accelerator pedal module with accelerator position sender
   
Removing
–  Remove storage compartment on driver's side → Rep. Gr.68.
–  Unplug electrical connector -2-.
–  Remove bolts -1- and -3-.
–  Remove accelerator pedal module.
Installing
Installation is carried out in the reverse order; note the following:
–  Install storage compartment on driver's side → Rep. Gr.68.
Vehicles with automatic gearbox:
If accelerator position sender or engine control unit is replaced, kick down function must be adapted on vehicles with automatic gearbox → Chapter.
Tightening torque
  A20-0799
ComponentNm
Accelerator pedal module to pedal bracket10

   

Adapting kick-down function after renewing accelerator pedal position sender or engine control unit > < Accelerator pedal module - exploded view of components