audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing "symphony” radio > < Overview of fitting locations

A4 Cabriolet Mk2

Removing and installing “chorus” and “concert” radios
Removing and installing “chorus” and “concert” radios
Special tools and workshop equipment required
   
t  Radio release tool -T10057-
–  When renewing radio -R-, select “Replacement” function for appropriate control unit in “Guided Fault Finding”.
For this purpose, use vehicle diagnostic, testing and information system -VAS 5051-.
–  Switch off all electrical equipment.
–  Remove ignition key.
Removing
  W00-1042
–  Insert two radio release tools -T10057- into slots on radio -R- until they engage. Pointed ends of grips must face outwards.
–  Grasp hold of grips on radio release tool -T10057- and pull radio -R- out of dash panel.
–  Release and unplug connectors at radio -R-.
–  Press release tabs on radio -R- and remove radio release tool -T10057-.
Installing
–  Plug in all connectors.
–  Slide radio -R- carefully into dash panel and engage it in mounting frame.
  A91-0490

Removing and installing "symphony” radio > < Overview of fitting locations