Audi Workshop Service and Repair Manuals

• Bolt (2x)
• ◆ Tightening torque 9.5 Nm.
• Door handle
• ◆ Removing and installing
  .
• Door lock
• ◆ Removal:
• ◆ Remove door trim

=> General Body Assembly, Interior; Repair group 70

• ‒ Door subframe removed.
• ‒ Remove cover for door lock
  => Page 57-23.
• ‒ Unclip securing and operating rods .
• ‒ Detach connecting hose from actuator for central locking system.
• ‒ Unscrew bolts -1-.
• ‒ Remove door lock and lock base plate -2-
• ◆ Installation:
• ‒ Install in reverse order.

• Operating clip
• ◆ Installing => Page 57-26.
• Bowden cable for interior door handle
• ◆ Removal:
• ‒ Door sub-frame removed.
• ‒ Remove cover for door lock => Page 57-23.
• ‒ Release Bowden cable (shown released in magnified view), unclip downwards and disengage from door lock.
• ◆ Installation:
• ‒ Install in reverse order.
• Lock base plate