Audi Workshop Service and Repair Manuals

Note:

In right-hand drive cars, remove the control unit as described on Page 87-67.

Removing

• ‒ Remove fresh air blower -V2 .
• ‒ Disconnect the fresh air blower -V2 from the base plate => Page87-103.

• ‒ → Remove screws -B-.
• ‒ Remove the control unit -A- from the base plate.

Installing

Installation is carried out in the reverse order; note the following:

• ‒ When installing the control, check the foam seal -C-, it must form a seal with the base plate.