Audi Workshop Service and Repair Manuals

Note:

In right-hand drive cars, remove the fresh-air blower as described on Page 87-67.

Removing

• ‒ Remove the glove box

=> General Body Assembly, Interior; Repair group 68; Storage compartments/covers; Removing and installing glove box

• ‒ → Detach connector -B-.
• ‒ Screw out the bolts -A-.
• ‒ Pull the fresh-air blower with base plate out of the air conditioner.

Installing

Install in reverse order.

Detaching/assembling the fresh-air blower -V2 and base plate

Detaching

• ‒ → Press the catches -A- and -B- back with a screwdriver.
• ‒ Pull fresh-air blower out of the base plate.
• ‒ Detach the connectors -C-.

Assembling

• ‒ When assembling the fresh-air blower in the base plate, ensure that the catches -A- and -B- are located correctly.
• ‒ After installing the fresh-air blower, check that it is correctly seated in the air conditioner.