audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing the fresh-air blower -V2- > < Connection diagram for Bowden cables on the heater control

A4 Mk1

Heating, Air Conditioner
Repairing heating - vehicles up to Model Year 1996
Removing and installing fresh-air blower series resistor -N24

Removing

  • ‒ Remove the glove box

=> General Body Assembly, Interior; Repair group 68; Storage compartments/covers; Removing and installing glove box
 
A80-0052
  • ‒ → Detach connector -A-.
  • ‒ Press back the catches -C-.
  • ‒ Remove the series resistor.

Installing

Installation is carried out in the reverse order; note the following:

  • ‒ After installation, check that the series resistor is seated correctly, if necessary secure with suitable screws to the eyelets -C-

Removing and installing the fresh-air blower -V2- > < Connection diagram for Bowden cables on the heater control