audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Removing and installing cover with Torsen differential > < Installing
5-Speed Manual Gearbox 01A (4WD)
Checking oil level in gearbox
Checking oil level in gearbox

Special tools, testers and auxiliary equipment required

  • ◆ 17 mm hexagon socket attachment

or

  • ◆ Socket attachment 3357

Notes:

  • ◆ The oil filler plug is on the left of the gearbox below the speedometer sender; it may be concealed by the heat shield for the drive shaft.
  • ◆ Depending on the version fitted, use either special tool 3357 or a 17 mm Allen key to loosen the oil filler plug.
 
A34-0010
  • ◆ Use special tool 3357 to loosen the oil drain plug.
  • ‒ → Unscrew oil filler plug (arrow) to check oil level.
    • ‒ Specified value: oil level up to lower edge of filler hole
  • ‒ Top up with gear oil, if necessary: Specification => from Page 00-3.
  • ‒ Fit oil filler plug.

Tightening torque

Component

Nm

Oil filler plug

25

Removing and installing cover with Torsen differential > < Installing