audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Checking and topping up ATF level > < Transporting automatic gearbox

A4 Mk1

Automatic gearbox 01N
Removing and installing gearbox
Securing gearbox to repair stand
 
G37-0031

Special tools and workshop equipment required

  • ◆ Holding plate VW 309
  • ◆ Support clamp VW 313
  • ◆ Gearbox support VW 353
  • ◆ Gearbox lifting tackle 3336
  • ◆ Workshop crane V.A.G 1202 A
 
A37-0313

Work sequence

  • ‒ Drain ATF.
  • ‒ Remove gearbox .
  • ‒ Remove torque converter or secure it to prevent it dropping out.
  • ‒ → Secure gearbox lifting tackle 3336 to gearbox housing flange.
  • ‒ Position pins so that 8 holes are visible in chain direction.
  • ‒ Insert gearbox with holding plate VW 309 in support clamp VW 313 with the aid of workshop hoist V.A.G 1202 A.
 
N37-0410
  • ‒ → Secure gearbox to assembly support with bolts -1- and -2-.
Warning

The centre of gravity of the gearbox is outside the pivot centre of the support clamp. A second fitter has to hold the gearbox housing when it is being turned to prevent it from swinging round.

Checking and topping up ATF level > < Transporting automatic gearbox