audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing ATF lines for 6-cyl. 2.7l 5V turbo-charged engine > < Removing and installing ATF lines for 6-cyl. petrol engines

A4 Mk1

Automatic Gearbox 01VFWD and 4WD
Dismantling and assembling gearbox
Removing and installing ATF lines for 6-cyl. diesel engines
 
A37-0331

Notes:

  • ◆ Place drip tray V.A.G 1306 underneath.
  • Release and tighten bolt - 21 Nm
    • ◆ Before tightening insert wiring manually until stop
  • ATF line from cooler
    • ◆ Observe markings on gearbox housing
  • Oil line to radiator
    • ◆ Observe markings on gearbox housing
  • O-ring
    • ◆ Insert with ATF
    • ◆ Always replace
 
A37-0050
  • O-ring
    • ◆ Insert with ATF
    • ◆ Always replace
  • Release and tighten bolt - 5 Nm
  • Release and tighten bolt - 5 Nm
  • O-ring
    • ◆ Insert with ATF
    • ◆ Always replace
  • Bracket
  • Union nut, 29 Nm
  • Nut - 5 Nm
  • Clip
  • Union nut, 29 Nm
  • Release and tighten bolt -10 Nm
  • Release and tighten bolt - 8 Nm
  • Bracket
  • Release and tighten bolt - 8 Nm

Removing and installing ATF lines for 6-cyl. 2.7l 5V turbo-charged engine > < Removing and installing ATF lines for 6-cyl. petrol engines