|
Removing and installing exhaust system components
Removing and installing exhaust system components
Notes:
-
◆ Always replace gaskets and self-locking nuts.
-
◆ Following exhaust system assembly work, make sure exhaust system is not subject to torsion and that there is an adequate gap between exhaust system and body. If necessary, unfasten clamp and align silencer and exhaust pipe such that there is sufficient distance from body all round and that mountings are subject to uniform load.
-
◆ To avoid damage, decoupling element of exhaust system is never to be kinked by more than 10 °.
|
