A4 Mk1
Poly V-belt drive for air conditioner - exploded view |
1 - | Bolt |
q | Tightening torque → Rep. Gr.87 |
2 - | Refrigerant lines |
q | Do not unscrew or disconnect |
3 - | Dowel sleeve |
q | Check for correct seating in bracket |
4 - | Bolt |
q | 25 Nm |
5 - | Bracket |
q | For air conditioner compressor |
6 - | Tensioner for poly V-belt |
7 - | Washer |
8 - | Bolt |
q | 20 Nm |
9 - | Poly V-belt |
q | Check for wear |
q | Do not kink |
q | Before removing, mark direction of rotation with chalk or felt-tipped pen |
q | Removing and installing → Chapter |
q | When installing, make sure it is properly seated on pulleys |
10 - | Air conditioner compressor |
q | Do not unscrew or disconnect refrigerant hoses or pipes. |
q | After removing compressor from mountings, secure it to longitudinal member with wire or similar. Do not leave it suspended from refrigerant pipes. |
11 - | Washer |