A4 Mk1
| Poly V-belt drive for power steering pump, alternator and viscous fan, poly V-belt drive for coolant pump - exploded view |
Caution
|
| 1 - | Bolt |
| q | 10 Nm |
| 2 - | Fan wheel for viscous fan |
| q | Removing and installing → Chapter „Removing and installing viscous fan“ |
| 3 - | Bolt |
| q | Tightening torque → Item |
| 4 - | V-belt pulley |
| q | For coolant pump |
| q | Installation position: straight half of pulley to coolant pump |
| 5 - | Poly V-belt |
| q | Check for wear |
| q | Do not kink |
| q | Before removing, mark direction of rotation with chalk or felt-tipped pen |
| q | Removing and installing → Chapter |
| q | When installing, make sure it is properly seated on pulleys |
| 6 - | Bolt |
| q | 40 Nm |
| q | Use only genuine bolts → Electronic parts catalogue |
| 7 - | Vibration damper with poly V-belt pulley |
| q | Can only be installed in one position |
| q | Removing and installing → Chapter |
| 8 - | Bolt |
| q | 25 Nm |
| 9 - | Tensioner for poly V-belt |
| 10 - | Poly V-belt pulley for viscous fan |
| q | Removing and installing → Chapter „Removing and installing viscous fan“ |
| 11 - | Retaining ring |
| q | For viscous fan bearing |
| 12 - | Bolt |
| q | 10 Nm |
| 13 - | Bearing for viscous fan |
| q | Removing and installing → Chapter |
| 14 - | T-head bolt |
| q | Insert before installing bracket for ancillaries |
| 15 - | Nut |
| q | Tightening torque → Rep. Gr.27 |
| 16 - | Bolt |
| q | Tightening torque → Rep. Gr.27 |
| 17 - | Alternator |
| q | Removing and installing → Rep. Gr.27 |
| 18 - | Bolt |
| 19 - | Bolt |
| q | 40 Nm |
| 20 - | Support |
| q | To cylinder block |
| 21 - | Bolt |
| q | 25 Nm |
| 22 - | Support for intake manifold |
| 23 - | Bolt |
| q | 20 Nm |
| 24 - | Bolt |
| q | 45 Nm |
| 25 - | Bolt |
| q | Different lengths |
| q | Tightening torque and sequence → Fig. |
| 26 - | Bolt |
| q | Tightening torque → Rep. Gr.48 |
| 27 - | Bracket for ancillaries |
| q | Removing and installing → Chapter |
| 28 - | Power steering pump |
| q | Removing and installing → Rep. Gr.48 |
| 29 - | Bolt |
| q | Tightening torque → Rep. Gr.48 |
| 30 - | Coolant pump |
| q | With thermostat |
| q | Removing and installing → Chapter |
| 31 - | Poly V-belt pulley for power steering pump |
| q | Installation position: shoulder faces to front of vehicle |
| 32 - | V-belt pulley for power steering pump |
| 33 - | Bolt |
| q | Tightening torque → Rep. Gr.48 |
| 34 - | V-belt |
| q | For coolant pump |
| q | Removing and installing → Chapter |
| 35 - | Viscous coupling |
| q | Removing and installing → Chapter „Removing and installing viscous fan“ |
