Audi Workshop Service and Repair Manuals

Note:

If it is not possible to erase the fault memory, interrogate the fault memory once again and repair faults.

Requirements:

• ● Fault memory has been interrogated => Page 01-7.
• ● All faults rectified.

After fault memory has been successfully interrogated:

→ Display on VAS 5051:

• ‒ Select diagnosis function "05 - Erase fault memory" from the menu -1-.

→ Display on VAS 5051:

•     1 -    - No display (before erasing memory)
• or
• -Fault memory is erased

Note:

If display zone -1- shows the message "Fault memory is not interrogated", this means you have not kept exactly to the required sequence of steps. The fault memory must first be interrogated before it can be erased.

•     2 -    Note:
  Do you now want to implement this function?
  (Existing data will be erased.)

• ‒ Press "OK" in display -2-.
• ‒ Press the ◂ button to exit from the function "05 - Erase fault memory".
• ‒ After completing repair work, interrogate the fault memory again.

Note:

This has the effect of erasing any faults that may have been stored while carrying out repairs (e.g. as a result of unplugging connectors).