Audi Workshop Service and Repair Manuals

When performing the next operation, it must be ensured that the wheels remain in contact with the turntables whilst raising the vehicle.

Should contact be lost, the turntables are not to be moved, as this would bias the measurement result.

• ‒ Position axle lift at front jacking points and raise vehicle.

Note:

Vehicle is raised by 60 mm.

• ‒ → Extend cylinders in threaded stems and fix in position with locking pins.

• Make sure locking pins -arrows- are correctly positioned.

• ‒ Lower vehicle onto spacer gauge V.A.G 1925.