A4 Mk2
| Removing and installing cradle for telephone handset in centre console |
| 1 - | Threaded moulding |
| q | Clipped into centre console from rear |
| 2 - | Centre console |
| q | With openings for base plate |
| q | Making openings on replacement parts → Chapter |
| 3 - | Mounting plate |
| q | For handset cradle |
| 4 - | Bolts (4x) |
| q | Tightening torque: 0.5 Nm |
| 5 - | Handset cradle |
| 6 - | Telephone handset -R37- |
| 7 - | Base plate |
| 8 - | Bolt |
| q | Tightening torque: 1.5 Nm |
| 9 - | Connector |
Note| Check that connector is correctly seated. |
| 10 - | Bolt |
| q | Tightening torque: 1.5 Nm |
