A4 Mk2
| Removing and installing seat height adjuster |
| 1 - | Seat height adjuster |
| – | Make improvised tool → Fig.. |
| – | Pull seat height adjuster -1- slightly away from seat. |
| – | Insert improvised tool -2- in mounting -4-. |
| – | Pull improvised tool -2- in direction of -arrow A- to press spring -3- outwards. |
| – | Pull off seat height adjuster -1- in direction of -arrow B-. |
| t | Installing |
| Install in reverse order of removal. Note the following: |
| – | Make sure retaining clip is attached to lever of seat height adjuster. Note correct installation position → Fig.. |
| 2 - | Improvised tool |
| 3 - | Spring |
| 4 - | Mounting |
|
|
|
|
