audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Removing and installing guide for side airbag > < Removing and installing side trim (tunnel side)
Removing and installing drawer (storage compartment)
Removing and installing drawer (storage compartment)
Special tools and workshop equipment required
   
t  Engine and gearbox support -VAS 6095-
  W00-1273
t  Seat repair stand -VAS 6136-
  W00-1274
1 - Drawer (storage compartment)
t  Removing:
–  Remove seat → Chapter.
–  Attach seat repair stand -VAS 6136- to engine and gearbox support -VAS 6095-.
–  Attach front seat to seat repair stand -VAS 6136-.
–  Pull handle -2- and pull out drawer -1-.
–  Guide screwdriver with bit attachment into opening -5- and unscrew bolt beneath.
–  Remove bolts -4- (2x).
–  Unscrew bolt -3-.
–  Detach drawer -1-.
t  Installing:
–  Install drawer (storage compartment) -1- in reverse order of removal.
2 - Handle
3 - Bolt
4 - Bolt
q   2x
5 - Opening

   

Removing and installing guide for side airbag > < Removing and installing side trim (tunnel side)