audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Removing and installing drawer (storage compartment) > < Removing and installing side trim (sill side)
Removing and installing side trim (tunnel side)
Removing and installing side trim (tunnel side)
Special tools and workshop equipment required
   
t  Engine and gearbox support -VAS 6095-
  W00-1273
t  Seat repair stand -VAS 6136-
  W00-1274
1 - Backrest
2 - Bolts (4x)
3 - Side trim (sill side; rear)
4 - Side trim (sill side; front)
5 - Connector (3x)
6 - Side trim (tunnel side)
t  Removing:
–  Remove seat → Chapter.
–  Attach seat repair stand -VAS 6136- to engine and gearbox support -VAS 6095-.
–  Attach front seat to seat repair stand -VAS 6136-.
–  Remove bolts -7- (2x).
–  Lift off side trim -6-.
t  Installing:
Install in reverse order of removal.
7 - Bolts (2x)
8 - Rubber strap of backrest cover

   

Removing and installing drawer (storage compartment) > < Removing and installing side trim (sill side)