audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Removing and installing roof grab handle > < Removing and installing moulded headliner
Wire routing at back of moulded headliner
   
Wire routing at back of moulded headliner
1 - Back of moulded headliner
Moulded headliner removed (set down on seats)
–  Unplug connector -4-.
–  Unplug connectors -5-.
–  Unplug connector -6-.
–  Disconnect wiring to sun visor -8-.
–  Unclip cable ducts -3-.
–  Guide wiring harness -2- through cable guide -7-.
2 - Wiring harness
3 - Cable duct (6x)
4 - Connector for rear interior light
5 - Connectors for sun visor light
6 - Connector for interior lighting
7 - Cable guide
8 - Wiring to sun visor

   

Removing and installing roof grab handle > < Removing and installing moulded headliner