A4 Mk2
Removing and installing rear lid trim (top) |
1 - | Bolts (2x) |
q | Tightening torque: 1.5 Nm |
2 - | Rear lid trim (top) |
t | Removing: |
– | Remove rear lid trim (bottom) → Item. |
– | Unscrew bolts -1- (2x). |
– | Press spring clips off rear lid at side edges of trim (4x). |
– | Detach spring clips -3- from rear lid at top of trim (4x). |
t | Installing: |
Install in reverse order of removal. Observe the following: |
– | Before installing rear lid trim (top) -2- make sure rubber buffers -4- (8x) are fitted. |
– | First guide rear lid trim (top) behind side window frames of rear lid. |
– | Clip in trim (first at top, then at sides). |
3 - | Spring clips (8x) |
4 - | Rubber buffers (8x) |