audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing fresh air blower control unit J126 and fresh air blower V2 > < Removing and installing operating and display unit, Climatronic control unit J255

A4 Mk2

Removing and installing air duct connection for glove box cooling
Removing and installing air duct connection for glove box cooling
  Note
   
t  The air conditioner unit is provided with a hole -A- for connecting an air duct -B- to the glove box. This air duct is used to route cooled air into the glove box.
t  On vehicles without glove box cooling, the hole -A- is sealed with a plug -C-.
–  Remove vent -D- (screwed to air duct -B-).
–  Remove glove box → General body repairs, interior; Rep. Gr.68.
–  Give the air duct -B- roughly a quarter anti-clockwise turn and remove it from the air conditioner unit.
  A87-0422

Removing and installing fresh air blower control unit J126 and fresh air blower V2 > < Removing and installing operating and display unit, Climatronic control unit J255