Audi Workshop Service and Repair Manuals > A4 Mk2 > Heating, ventilation, air conditioning system | Air conditioning | Self diagnosis, V.A.G Inspection Service | Erasing fault memory, end of output

Encoding operating and display unit, Climatronic control unit J255 > < Erasing fault memory

End of output

Requirements:

t	Fault memory interrogated and erased, basic setting performed and encoding checked → Chapter

Note

The currently valid code transmitted by the control unit in dash panel insert -J285- is displayed in the measured value block (display group “019”) → Chapter.

Indicated on display of vehicle diagnostic, testing and information system -VAS 5051A-:

–	Select function “06 - End of output”.

–	Wait until this display (start menu) appears on vehicle diagnostic, testing and information system -VAS 5051A-.

–	Switch off ignition and unplug diagnostic connector.

Heating, ventilation, air conditioning system
Air conditioning / Self diagnosis, V.A.G Inspection Service
Erasing fault memory, end of output
End of output

Encoding operating and display unit, Climatronic control unit J255 > < Erasing fault memory

Audi Workshop Service and Repair Manuals

A4 Mk2

Heating, ventilation, air conditioning system Air conditioning / Self diagnosis, V.A.G Inspection Service Erasing fault memory, end of output End of output

Heating, ventilation, air conditioning system Air conditioning / Self diagnosis, V.A.G Inspection Service Erasing fault memory, end of output End of output

Heating, ventilation, air conditioning system
Air conditioning / Self diagnosis, V.A.G Inspection Service
Erasing fault memory, end of output
End of output

Heating, ventilation, air conditioning system
Air conditioning / Self diagnosis, V.A.G Inspection Service
Erasing fault memory, end of output
End of output