1 | Chassis number first transmitted by dash panel insert on initial start-up of auxiliary heater (auxiliary heater control unit -J364-) or following last adaption of auxiliary heater control unit -J364- and stored in auxiliary heater control unit -J364- | t
| Data are transmitted by way of the convenience data bus system |
t
| New replacement auxiliary heater control units -J364- are supplied without chassis number |
t
| If the chassis number displayed does not coincide with that transmitted by the control unit in dash panel insert -J285-, the fault “Control unit incorrect chassis number” is stored in the auxiliary heater control unit -J364-. |
t
| If an auxiliary heater control unit -J364- is installed in a different vehicle, the old chassis number must be erased by way of the “Adaption” function → Chapter |
|